To augment Permafloat® float drums, Cellofoam also offers a full line of dock protection, hardware and accessories. Permafloat® Dock Bumpers are made from a specially formulated PVC compound which provides maximum protection against weather, fungus and UV rays. Available in black or white, these bumpers have a reinforced internal structure, which offers unsurpassed impact resistance.
Distinctive Features Include:
Optional flat back or recessed (to fit aluminum or metal dock posts)
Durable, long lasting thick plastic with UV inhibitor
Easy to mount
Recessed mounting points
Provide boat protection when docking
The corner bumpers are the first line of defense against expensive damage to boats, and are made of durable yet flexible material. These bumpers can easily be installed on most dock surfaces that have 90 degree corners and can withstand harsh dockside
Cellofoam’s Wave Defender® protects your dock from rough waves caused by boat wakes and wind. It reduces your dock’s rocking and rolling motion, thereby reducing dock wear and tear.
Wave Defender® stabilizes your dock just as well as commonly used heavy weights but without requiring additional floatation to maintain freeboard. It can be used with both new or existing docks, allowing you to relax and better enjoy your time on the water.
Wave Defender® attenuates waves and may serve as a breakwater to protect residential and commercial docks.
The Wave Defender® system is comprised of a double-flanged, EPS-filled Permafloat® float with an empty double-flanged shell suspended below it. Both have a nominal thickness of 0.200 inches, much thicker than standard rotationally molded dock floats, and weigh about 50 lb empty and 66 lb filled with EPS. Wave Defender® float shells have molded-in slots and very tough flanges to meet forces felt by wave action for years. The EPS-filled float has a maximum buoyancy of 1130 lbs.
Wave Defender® shown attached to a wooden dock stringer (not included)
Wave Defender® features:
Rugged, with 33% thicker walls than standard floats
Resistant to sun, oil, gas, debris, and marine life
Double flanged with thick mounting flanges for long life and slots for easy installation
Floats filled with foam for maximum buoyancy even if breached
Neutral buoyancy shells filled with water stabilize your dock while maintaining freeboard
Size of floats and shells: 48 x 36 x 20 inches
The Wave Defender® dock stabilization system can be easily attached to almost any new or existing wood, steel or aluminum dock system. Cellofoam North America Inc. has been producing Permafloat® dock floats and Wave Defender® dock stabilization systems for decades and thousands of dock owners can attest to Cellofoam’s superior quality and performance.
Cellofoam North America Inc. (Cellofoam) recently announced the launch of the Permaport Xpress™ personal watercraft (PWC) docking system. This redesign of Cellofoam’s original Permaport® incorporates many attributes that will delight users.
The Permaport Xpress™ is larger to handle all major PWC brands and sizes, and it features an easy drive-on / glide-off design. Attractive and rugged, Permaport Xpress™ is suitable for both commercial and residential use. The port is available in tan and grey textured granite colors.
Permaport Xpress™ details:
Increased length and buoyancy to handle all major PWC brands and sizes
Easy drive-on / glide-off design
Commercial wheels provide stability and durability
Easily adjustable wheels for custom PWC fits
Universal hardware kit for all standard mounting applications
Extra quiet mounting system
Xpress Walk™ and Xpress Step™ accessories to complement the system
Permaport Xpress™ is of the highest quality and will protect PWCs through years of worry-free use. The port is foam-filled to make it virtually unsinkable. The new, heavy-duty, noise reduction mounting hardware eliminates metal-to-metal contact and fits all standard mounting applications.
A new addition to the Permaport Xpress™ system is the Xpress Step™, which attaches to the dock and covers the mounting hardware to provide a comfortable and attractive point of entry to the port. The Permaport Xpress™ system is also complemented with accessories such as the Xpress Walk™. An extra walkway the full length of the port, Xpress Walk™ provides the comfort of an additional 20 inches of width to the boarding surface. Mounted beside or between multiple Permaport Xpress™ ports, it will enhance the start and end of the journey.
The Permalaunch® features a Custom Cradle Design that helps you stay dry, launch quick and safer on your next Kayak, or Canoe adventure! It can be mounted to floating docks, fixed docks, or stand-alone pilings.
Great for Kayaks, Canoes, & Stand Up Paddle Boards
Safest way to enter or exit a Kayak, Canoe from the dock
Permalaunch Cradles vessel for amazing stability
Float on and float off design allows for easy launch and retrieval
Mounts to fixed or floating docks, or to stand alone posts and pilings
Enter and exit from one end or both ends
Everything about the Permalaunch® was designed for stability and ease of use. The Float Off – Float On Feature’s start with the vessel being partially submerged when boarding. The three middle underwater supports create stability for boarding, yet allow buoyancy in the vessel for ease of launch or retrieval. Custom designed hand rails allow you to use your paddle to effortlessly pull the vessel off the launch, or guide yourself back on. The two outside underwater braces are set lower in the water to allow the vessel to launch or float back on with minimal effort from the paddler. You will be amazed at how easily every member of the family can come and go with the Permalaunch®!
Directional Options: The base unit comes with one set of hand rails so paddlers may leave and return from the same direction. Optional additional hand rails allow paddlers to leave and return from either direction. Optional vertical hand rails are also available for additional stability in boarding or disembarking, and for additional balance.
Cellofoam® Marker Buoys
Manufactured for Maximum Durability
Cellofoam manufactures Marker Buoys that are perfect for No Wake Zones and other areas requiring buoyed warnings. Label options may include: No Boats; Swim Area; Slow No Wake; Slow 5MPH; No Swimming; Keep Out; and others. Our Marker Buoys are rotationally molded and foam-filled to ensure flotation. They are counter weighted with concrete to enable the buoy to remain vertical and visible under demanding marine conditions.
Contact Cellofoam today at 800-531-4734 to discuss hazard markers, channel markers, or other optional messages to address your water designation needs.
Features
Made of heavy-duty, UV protected polyethylene
One-piece seamless construction
Size: Height - 72", Diameter - 16" (shorter versions available by request)
Ballasted with concrete
Eye bolt in base for anchoring ease
Large ballast diameter provides increased stability
Long-lasting decals are molded into recessed areas to minimize scuffing from passing traffic
Permaport Xpress™ is of the highest quality and will protect PWCs through years of worry-free use. The port is foam-filled to make it virtually unsinkable. The new, heavy-duty, noise reduction mounting hardware eliminates metal-to-metal contact and fits all standard mounting applications.
A new addition to the Permaport Xpress™ system is the Xpress Step™, which attaches to the dock and covers the mounting hardware to provide a comfortable and attractive point of entry to the port. The Permaport Xpress™ system is also complemented with accessories such as the Xpress Walk™. An extra walkway the full length of the port, Xpress Walk™ provides the comfort of an additional 20 inches of width to the boarding surface. Mounted beside or between multiple Permaport Xpress™ ports, it will enhance the start and end of the journey.
Permaport Xpress™ details:
Increased length and buoyancy to handle all major PWC brands and sizes
Easy drive-on / glide-off design
Commercial wheels provide stability and durability
Easily adjustable wheels for custom PWC fits
Universal hardware kit for all standard mounting applications
Extra quiet mounting system
Xpress Walk™ and Xpress Step™ accessories to complement the system
Permaport Xpress™ is of the highest quality and will protect PWCs through years of worry-free use. The port is foam-filled to make it virtually unsinkable. The new, heavy-duty, noise reduction mounting hardware eliminates metal-to-metal contact and fits all standard mounting applications.
A new addition to the Permaport Xpress™ system is the Xpress Step™, which attaches to the dock and covers the mounting hardware to provide a comfortable and attractive point of entry to the port. The Permaport Xpress™ system is also complemented with accessories such as the Xpress Walk™. An extra walkway the full length of the port, Xpress Walk™ provides the comfort of an additional 20 inches of width to the boarding surface. Mounted beside or between multiple Permaport Xpress™ ports, it will enhance the start and end of the journey.
Wave Defender® - General (3806 KB)
