Cellofoam

information@cellofoamna.com  800-241-3634


 

Committed to providing our customers with exceptional products and services

 
 

Contact Cellofoam

 
* Required








Phone
Email
Prove you're not a robot *

Poly Panel EPS Insulation

Save Energy, Save Money, 
Insulate Your Basement Walls


Cellofoam Poly Panel is an insulation board that may significantly reduce energy costs by adding R-value to your interior, unfinished, basement walls. Poly Panel was specifically designed many years ago (note retro marketing image at page bottom) for applying directly to basement wall concrete masonry between standard 2 x 4 studs on 16-inch centers or nominal 2-inch furring strips, and is still commonly used today to lower heating bills.  Each package of Poly Panel contains 6 sheets of ¾” x 14 ½” x 48” insulation. When installed between 2 x 4 studs or nominal 2-inch furring strips, one package will cover 32 square feet.

Cellofoam Poly Panel is made of premium expanded polystyrene (EPS) rigid insulation that meets or exceeds the requirements of ASTM C578, Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation. The EPS is composed of closed cells with excellent dimensional stability, compressive strength, and water resistance. 

ADVANTAGES


Cost Savings:  EPS reduces energy costs and offers the highest R-value per dollar of any foam insulation board. Poly Panel is lightweight and easy to install, with adhesive or a friction fit.

Code Approvals: Underwriters Laboratory Listed, UL ER7260, for interior and walls. Please consult local building codes for system requirements and modern basement moisture management building techniques. Insulation must be separated from living areas by an approved thermal barrier of 0.5-inch gypsum wallboard or equivalent.

Stable R-value: A single layer of Cellofoam Poly Panel contributes an R-value of 2.9 at 75 deg F and 3.1 at 40 deg F.  The R-value of EPS is permanent because the only gas in EPS is air. Unlike Polyiso or XPS whose blowing agents outgas and therefore lose R-value, EPS R-values do not degrade over decades of use.  

Moisture Resistant: Cellofoam EPS is quick drying and does not readily absorb moisture from the air. Its closed-cell structure reduces the absorption and migration of moisture. Not a vapor barrier. 

Premium Quality: Meets or exceeds ASTM C578 specifications.  When properly installed it does not deteriorate with age, and is resistant to mildew, rot, fungus, and bacteria. 

Environmentally Friendly: Cellofoam EPS contains no formaldehyde or ozone-depleting CFCs or HCFCs. Its EPS core is 100% recyclable and may contain recycled material. 

Size: Each package of Poly Panel contains 6 sheets of ¾” x 14 ½” x 48” insulation. When installed between 2 x 4s or nominal 2-inch furring strips, one package will cover 32 square feet. A narrower width 13 5/8” variation may be special ordered for 4-inch nominal framing at 16” centers.

Poly Panel Typical Physical Properties

                                                



     


 
 
 

How to Reach us?

Corporate Headquarters

Cellofoam North America Inc.
1977 Weaver Court
Conyers, GA 30013 

PH:800-241-3634
Email:information@cellofoamna.com

 
EPS Alliance find an EPS recycling locationASSN Association of Rotational Molders
 

Copyright © 1998-2021 Cellofoam North America Inc. All Rights reserved. Legal | Sitemap